diff options
| -rw-r--r-- | README.md | 88 |
1 files changed, 44 insertions, 44 deletions
@@ -7,17 +7,17 @@ # Prepare and boot the installation media -1. Download NixOS ISO at https://nixos.org/download.html. +Download NixOS ISO at https://nixos.org/download.html. -2. Write ISO to a USB stick: +Write ISO to a USB stick: ```sh sudo dd if=nix.iso of=/dev/sdX bs=4M status=progress ``` -3. Boot from the USB stick on the target machine. +Boot from the USB stick on the target machine. -4. Connect as sudo: +Connect as sudo: ```sh sudo su @@ -25,16 +25,16 @@ # SWAP size -1. Check your RAM with `top`. +Check your RAM with `top`. -2. Get the SWAP size according to your RAM size and if you need hibernation: +Get the SWAP size according to your RAM size and if you need hibernation: https://itsfoss.com/swap-size/ # Partition the disk -1. Use `lsblk` your show block devices. +Use `lsblk` your show block devices. -2. Launch `gdisk /dev/<disk>`: +Launch `gdisk /dev/<disk>`: - verify the partition table with `v`, - delete every partition with `d`, @@ -42,14 +42,14 @@ https://itsfoss.com/swap-size/ - add a system partition (8300 Linux LVM) on the remaining space with `n`, - write the partition table with `w`. -3. Encrypt your disk and open it: +Encrypt your disk and open it: ```sh cryptsetup luksFormat /dev/<SYSTEM> cryptsetup luksOpen /dev/<SYSTEM> crypted ``` -4. Create swap and root logical volumes: +Create swap and root logical volumes: ```sh pvcreate /dev/mapper/crypted @@ -58,7 +58,7 @@ https://itsfoss.com/swap-size/ lvcreate -l '100%FREE' -n root vg ``` -5. Format the partitions: +Format the partitions: ```sh mkfs.fat -F 32 -n BOOT /dev/<BOOT> @@ -66,7 +66,7 @@ https://itsfoss.com/swap-size/ mkswap -L swap /dev/vg/swap ``` -6. Mount partitions +Mount partitions ```sh mount /dev/vg/root /mnt @@ -77,25 +77,25 @@ https://itsfoss.com/swap-size/ # Connect to Internet -1. Note your wifi interface: +Note your wifi interface: ```sh ifconfig ``` -2. Scan available ESSID with: +Scan available ESSID with: ```sh iwlist <INTERFACE> scan | grep ESSID ``` -3. Write `wpa_supplicant` configuration: +Write `wpa_supplicant` configuration: ```sh wpa_passphrase <ESSID> | sudo tee /etc/wpa_supplicant.conf ``` -4. Start `wpa_supplicant`: +Start `wpa_supplicant`: ```sh wpa_supplicant -B -i <INTERFACE> -c /etc/wpa_supplicant.conf @@ -103,15 +103,15 @@ https://itsfoss.com/swap-size/ # Install -1. Generate configuration: +Generate configuration: ```sh nixos-generate-config --root /mnt ``` -2. Rename disks by labels in `mnt/etc/nixos/hardware-configuration.nix`. +Rename disks by labels in `mnt/etc/nixos/hardware-configuration.nix`. -3. Complete `/mnt/etc/nixos/configuration.nix` +Complete `/mnt/etc/nixos/configuration.nix` ```nix # Hostname @@ -150,19 +150,19 @@ https://itsfoss.com/swap-size/ }; ``` -4. Install: +Install: ```sh nixos-install ``` -5. Set user password: +Set user password: ```sh passwd joris ``` -6. Reboot: +Reboot: ```sh reboot @@ -182,9 +182,9 @@ If the system doesn’t boot, boot from the USB key, and: # Import GPG key -1. Plug in recuperation key and check label with `lsblk`. +Plug in recuperation key and check label with `lsblk`. -2. Decrypt and mount private backup: +Decrypt and mount private backup: ```sh sudo cryptsetup luksOpen /dev/XXX secrets @@ -192,56 +192,56 @@ If the system doesn’t boot, boot from the USB key, and: sudo mount /dev/mapper/secrets encrypted-storage ``` -3. Import: +Import: ```sh gpg --import encrypted-storage/pubkey.asc gpg --allow-secret-key-import --import encrypted-storage/privkey.asc ``` -4. Trust: +Trust: ```sh gpg --edit-key joris@guyonvarch.me gpg> trust ``` -5. Write SSH keygrip in `~/.gnupg/sshcontrol`: +Write SSH keygrip in `~/.gnupg/sshcontrol`: ```sh gpg2 -K --with-keygrip # [A] keygrip ``` -6. Verify that SSH key is available: +Verify that SSH key is available: ```sh ssh-add -L ``` -7. Unmount and close the encrypted volume: +Unmount and close the encrypted volume: ```bash sudo umount encrypted-storage/ sudo cryptsetup luksClose secret ``` -8. Unplug the volume. +Unplug the volume. # Clone the system -1. Connect to Internet: +Connect to Internet: ```sh nmtui ``` -2. Install git: +Install git: ```sh nix-env -i git ``` -3. Clone the configuration: +Clone the configuration: ```sh git clone git@guyonvarch.me:/home/git/config /home/joris/code/config @@ -249,28 +249,28 @@ If the system doesn’t boot, boot from the USB key, and: git checkout main ``` -4. Extract the system’s `hardware-configuration.nix`, and add it to `./hosts/joris/hardware/`. +Extract the system’s `hardware-configuration.nix`, and add it to `./hosts/joris/hardware/`. -5. Move aside the previous configuration: +Move aside the previous configuration: ```sh cp -r /etc/nixos config-old sudo rm -rf /etc/nixos ``` -6. Link `/etc/nixos` to the configuration: +Link `/etc/nixos` to the configuration: ```sh sudo ln -s /home/joris/code/config /etc/nixos ``` -7. Disable automatic export of documents if it’s not the principal system. +Disable automatic export of documents if it’s not the principal system. -8. Change network interface in `hosts/network/joris/connman.nix`. +Change network interface in `hosts/network/joris/connman.nix`. -9. Remove `.gnupg/.sshcontrol` +Remove `.gnupg/.sshcontrol` -10. Build: +Build: ```sh nixos-rebuild switch @@ -278,25 +278,25 @@ If the system doesn’t boot, boot from the USB key, and: # Setup user environment -1. Create user directories: +Create user directories: ```sh mkdir code documents downloads music pictures videos ``` -2. Create `.less` to setup less keybindings from `.lesskey`: +Create `.less` to setup less keybindings from `.lesskey`: ```sh lesskey ``` -3. Setup password store: +Setup password store: ```sh git clone git@guyonvarch.me:/home/git/password-store.git .password-store ``` -4. Get documents: +Get documents: ```sh duplicity restore rsync://guyonvarch.me/~/backups/documents documents |